Phone 409 797 3806

Clock Movement Electrical Hookup

The movement consists of two motors (a 1 RPM motor and a 10 RPM motor).

One wire from each motor goes to a common ground.  white
The power 110 volts household current goes to the center screw on reset switch.

The two wires left on  the clock movement, black to clock  motor and red to reset motor.
Green wire is case ground.

Mount the reset switch ground level or  where needed.

Only one motor runs at a time,  the switch is On (normal clock) or Off  or On (Reset= runs 10 times as fast)

Note: Do not turn minute clock hand by hand, as it will strip gears and void warranty.
           To access clock from back side if necessary
On Off On